Building Construction

Including Steel Members, Concrete Members, Wood Members, Ventilation Ducts, and Partition Walls.

Perlifoc Mortar Spray

Mortar for fireproofing structural elements and enclosures. It is a wet-mix spray-applied fire protective rendering made of light weight expanded perlite and vermiculite aggregates.

Main features :
  • Easy application
  • High mechanical strength
  • Fire resistance up to 4 hours
  • No need for maintenance

Applications :
  • Load bearing concrete elements
  • Load bearing steel elements
  • Load bearing flat concrete profiled sheet composite elements
  • Load bearing timber elements
  • Technical services assemblies in buildings
  • Load-bearing  floor of timbers, joists and concrete slabs
Perlifoc LD Mortar Spray

Low density fireproofing mortar. It is intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It has been tested and is certified for fire resistance rating up to 4 hours.

Main features :
  • Durable cementitious formulation Non-combustible 
  • Can be injected with Accelerator A-20 for fast set and increased yield (optional)  
  • Asbestos-free – complies with EPA and OSHA regulations
  • Mineral Wool free – no airborne fibres
  • Styrene free – no toxic decomposition gases
  • Economical – Maintains project on budget
  • Design flexibility with over 40 UL designs

Nullifire Intumescent Paints

Nullifire Intumescent Paints :
  • Clean and fast system
  • High performance system

Nullifire S 707-60/S 707-120: Waterborne Basecoat is a white thin film intumescent coating for the fire protection of internal structural steelwork. S707-120 can provide up to 120 minutes fire resistance.

Nullifire S 707-60/S 707-120 main features:

  • S707-60 System: 30, 60 and 90 minutes achieved in a single coat
  • S707-120 System: 90 and 120 minutes fire protection
  • Up to 30% faster drying/ overcoating times compared to traditional solvent-based coatings
  • Smooth hard finish, unlike traditional solvent-based systems, which tend to remain soft and susceptible to damage

       Cllck image to view larger image 

Product Datasheets