Floormate*
 

Floormate*

FLOORMATE 200-X, 500-X, STYROFOAM SP-X

FLOORMATE™ is the STYROFOAM™ Solution for insulating floors. FLOORMATE insulation is available in a range of compressive strengths to match the loading requirements of individual projects. FLOORMATE insulation can be installed under or over the slab in groundbearing concrete floors and is suitable for use on suspended beam and block or timber floors.

Further information on designing with FLOORMATE insulation can be found at Insulating with STYROFOAM: Insulating Floors.

Technical Data

Properties Standard Unit CE Code FLOORMATE
200-X
STYROFOAM
SP-X
FLOORMATE
500-X
Thermal conductivity*

         ≤80mm
         81-120mm
         >120mm


BS EN 12667
BS EN 12667
BS EN 12667


W/mK
W/mK
W/mK


λD
λD
λD


0.029
0.029
0.031


0.029
0.029


0.029
0.029
Compressive strength at 10% or break (90 days) BS EN 826 kN/m2 CS(10Y)i 200 350 500
Design load
2% maximum deflection (50 years) BS EN 1606 kN/m2 CC(2/1.5/50)σc 60 110 150
Water vapour resistivity BS EN 12086 MNs/gm 825 875 825
Water vapour diffusion resistance factor BS EN 12086 m MUi 165 175 165
Water absorption
Total immersion BS EN 12087 % vol WL(T)i <0.5 <0.5 <0.5
Diffusion BS EN 12088 % vol WL(V)i <3
Freeze/thaw, after 300 cycles BS EN12091 % vol FTi <1
Dimensional stability
48hrs at 70C/90%RH BS EN 1604 % DS(TH) <2 <2 <2
168hrs at 40kPa/70C BS EN 1605 % DLT(2)5
Density (aim) BS EN 1602 kg/m3 38 38 40
Dimensions
Length BS EN 822 mm 2500 2500 1250
Width BS EN 822 mm 600 600 600
Thickness BS EN 823 mm Ti 50, 60, 70,
80, 90, 100
50, 75 50. 80, 120
Fire classification – reaction to fire BS EN 13164
BS EN 13501
Euroclass E E E
Appearance
Surface       skin skin skin
Edge profile       butt edge butt edge shiplap
Application       floors – domestic floors – medium
load bearing
floors – high
load bearing
Certification BBA Agrément     92/2782 92/2782 92/2782

The properties given are typical (unless stated otherwise). Results of tests described are available from Dow

* declared 90/90 value - BS EN 13164